StormWater Pros, LLC

Runoff-Black-CroppedSMS

Ultratech Product Distributor

Ultra-Tech-LogoStormWater Pros is an approved product distributor for Ultratech. Stormwater products may be viewed at the Ultratech website – www.stormwaterproducts.com

Storm Water Management Plans

Often referred to as Storm Water Pollution Prevention Plans or Erosion and Sediment Control Plans as many cities and municipalities call them, the Storm Water Management Plans are designed plans and/or manuals that document and specify best management practices (BMPs) that control and maintain storm water flows and pollutants from adversely impacting downstream properties and waterways. Under directive from the Clean Water Act, the Arizona Department of Environmental Quality requires that many properties and construction activities have a Storm Water Management Plan/Manual performed and available. The BMP improvements from the Storm Water Management Plan may be installed and maintained temporally or permanently to control erosion, flow velocity, discharge, sedimentation transport, and pollutants or harmful chemicals.

Maintaining-a-StormFilter

Storm Water Management Inspections

StormWater Pros have qualified engineers who properly inspect and record for needed maintenance all temporally-placed and permanent BMPs associated with a site. Best Management Practices or BMPs are required and specified within a site’s Storm Water Management Plan and are required for periodic inspections and inspections after a measureable storm event. StormWater Pros professionals properly assess and evaluate the most cost-effective method in maintaining the BMPs performance. BMP inspections include but not limited to: wattles, filter socks, silt fences, gravel filter berms, sediment catchments, stabilized construction pads, concrete washouts, inlet protection, drainage swales, drainage basin inserts, gutter guards, check dams, slope stabilization, debris screens, oil absorbent booms, dewatering bags, and sand bags.

Best Management Practices Installation

Best Management Practices or BMPs are required and specified within a site’s Storm Water Management Plan. StormWater Pros have qualified engineers and construction personnel who install, construct, inspect, and properly maintain BMPs. Both temporally-placed and permanent BMPs may be constructed and installed with care in order to achieve long lasting performance. BMPs may include: wattles, filter socks, silt fences, gravel filter berms, sediment catchments, stabilized construction pads, concrete washouts, inlet protection, drainage swales, drainage basin inserts, gutter guards, check dams, slope stabilization, debris screens, oil absorbent booms, dewatering bags, and sand bags.

NOI Discharge and MSGP Discharge Submittals

NOI or Notice of Intent Discharge submittals are required for every construction site over one acre and industrial activity sites. StormWater Pros have experienced professionals that coordinate and provide interface with the Arizona Department of Environmental Quality (ADEQ) in taking care of all the necessary documentation and obtain needed permit approvals to make a project a success.

ADEQ Compliance Submittals

Many properties can become plagued with mandatory requests for compliance from the Arizona Department of Environmental Quality or ADEQ. StormWater Pros have experienced professionals who can address compliance issues and requests from ADEQ and provide a peace of mind in handling all requested documentation and coordination to make any ADEQ compliance issues disappear.